How can i unlock (Register) Learn To Speak English Deluxe?
What do I do if I am unable to record?
When i run the program i get "Error code 0000005"
How many times can i activate Learn to Speak?
How can i deactivate(remove the license) Learn to Speak?
Is Learn to speak compatible with Windows Vista?
Q: How can i unlock (Register) Learn To Speak English Deluxe?"
Q: What do I do if I am unable to record?
- If you are running Windows® 98 or later, click on Start, select Programs, Choose Accessories, click on Entertainment, and then click Sound Recorder.
- A window that looks similar to the controls for a tape deck should appear.
- Click on the Record button (with the red circle) to record a test message. Speak the words, "Testing one, two, three." When you have finished speaking, click on the Stop button (with the black square).
- Click on the Play button (The play button is located immediately to the left of the Stop button. The Play button has a single triangle that points to the right.)
- Watch the green line closely.
- If the green line fluctuates a lot but you don't hear sound, ensure that your speakers are plugged in properly, turned on, and that all of your volume controls are properly set.
- If the green line doesn't fluctuate at all, this is an indication that you are not recording sound. Go on to the next procedure.
This is the procedure to perform if you have verified that you are not able to record sound.
- Click on Start, select Programs, and then click Accessories.
- If you are running Windows® 98, click on Start, select Programs, choose Accessories, select Entertainment, and then click Volume Control. A window called Volume Control should appear.
- Click Options on the menu bar and then select Properties. A Properties window will open.
- Inside the Properties window, under "Adjust Volume For," click Recording.
- Ensure that there is a check mark in every box listed at the bottom of the Properties window, and then click on OK. A Recording Controls window will appear.
- Find the Microphone Balance column.
- Verify that the volume is turned up, and look for a check mark in the Select box at the bottom of the slider.
- If there is not a check mark in the Select box, click on the empty box to place a check mark there. This should activate your microphone. Test it again in Sound Recorder. (See previous procedure, above.)
- If there is a check mark, then you may not have your microphone plugged in correctly, or may be experiencing issues with another component of your computer. Please contact the manufacturer.
Q: When i run the program i get "Error code 0000005"
Q: How many times can i activate Learn to Speak?
Q: How can i deactivate(remove the license) Learn to Speak?
1. Press the "scroll lock" button on your keyboard. now click on "RUN" in learn to speak launcher window. The "Activation Dialog" will appear once again. Now select "remove license" and follow the instructions on the screen.
2. Press and hold the "Control (ctl)" button on your keyboard. now click on "RUN" in learn to speak launcher window. The "Activation Dialog" will appear once again. Now select "remove license" and follow the instructions on the screen.
when you follow the instructions you'll get a "removal code". write it down and log into our website. select the required copy and click on "click to remove". Now type the given "removal code" and click submit.
Q: Is Learn to Speak compatible with Windows Vista?
|
What are on-line manuals?
The Online Manual is a printer-ready document in Adobe Acrobat's Portable Document Format (PDF). Our setup routine copies the manual to your hard drive during installation.
How can I access a copy of my software manual?
If you already have Adobe Acrobat Reader 3.0 or higher on your computer, your manual is ready to read immediately after you install the program.
If Acrobat Reader is not already installed on your computer, you may download the latest reader from Adobe or follow the instructions below on how to install the version that came with your program:
1. Click Start, Programs, and select the name of the program you just installed.
2. From your program's sub-menu, click on the Read Me file.
3. Follow the instructions that are provided to you from the read me file on how to install the Adobe Acrobat Reader from your CD.
|